Roland SP-404MK - Marking and Splitting Samples

EditingaSample(SAMPLEEDIT)
MarkingandSplittingSamples(MARK)
Youcansplitasampleupintomultiplesmallersamples.Tosplitasample,youmustfirstmarkthelocationswherethe
sampleistobesplitusingmarkers.
Hereweexplainaboutthedifferentwaystoaddmarkers.
Addingamarkeratthedesiredlocation
Youcanchoosewheretoplaceamarker(thelocationwherethesampleistobesplit)whilelookingatthesampleʼs
waveform.
Addingmarkerswhilepreviewingasample
Youcanchoosewheretoplaceamarker(thelocationwherethesampleistobesplit)whilepreviewing(listeningto)the
sample.
Presspads[1]‒[16]toselectthesampletowhichyouwanttoaddmarkers.
1
Holddownthe[SHIFT]buttonandpressthe[START/END]button.
Themarkersettingscreenappears.
2
Decideonwheretoaddthemarkerbyusingthe[CTRL1]knob,andthenpressthe[MARK]button.
Thisaddsthemarkertothesample.
Youcanusethefollowingcontrollerswhentheeditscreenisshown.
Controller Operation
[CTRL1]knob Movesthecursor(thelocationwhereamarkerisplaced).
[SHIFT]button+[CTRL1]
knob
Zoomstheareaaroundthecursorin/out.
[CTRL2]knob Movesthemarkerthatyouselectedusingthe[CTRL3]knob.
[SHIFT]button+[CTRL2]
knob
Zoomstheareain/outaroundthemarkerselectedusingthe[CTRL
3]knob.
[CTRL3]knob Selectsthemarkertooperate.
[MARK]button Addsamarkeratthecursorlocation.
[DEL]button Deletesthemarkerthatyouselectedusingthe[CTRL3]knob.
Youcanpresspads[1]‒[16]topreviewtheaudioatthecorrespondingmarker.
3
Presspads[1]‒[16]toselectthesampletowhichyouwanttoaddmarkers.
1