Roland SP-404MK - Processing a Sample

EditingaSample(SAMPLEEDIT) > SettingthePlaybackandLoopRegions(START/END)
ProcessingaSample
Youcanusethestartpointandendpointsettingstoprocessasample.
Notethatthisoperationdirectlyprocessestheoriginalsampledata.Onceyouprocessasampleinthisway,itcannot
berestored.
Setthestartandendpointsbyfollowingthestepsin“SettingthePlaybackandLoopRegions
(START/END).”
1
Pressthe[VALUE]knob.
Amenuappears.
2
Usethe[VALUE]knobtoselecttheitem,andpressthe[VALUE]knob.
Thesampleisprocessed.
Item Action
TRUNCATE Trims(deletes)thesampleʼsaudioregionsbeforethestartpointandaftertheend
point.
NORMALIZE Increasestheoverallvolume.
EMPHASIS Increasesthehigh-frequencysound.
CANCEL Closesthemenuscreen.
3