Roland TAIKO-1 - Using the Metronome (Metronome); Recording (Rec)

Playing
14
Using the Metronome (Metronome)
1. Press “MENU” (F2 button).
2. Use the [
H
] [
I
] buttons to select “Lesson,” and then
press “SELECT” (F2 button).
3. Use the [
H
] [
I
] buttons to select “Metronome,” and
then press “SELECT” (F2 button).
The setting screen appears.
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
Tempo 20–260
Sets the tempo of the
metronome.
Beat 1–9
Sets the time signature (the
number of beats per measure).
Rhythm Type
ˇ
–
˜
Sets the interval of the
metronome.
Sound
&
“Metronome
Sounds” (p. 53)
Adjusts the metronome’s sound.
Pan L30–CTR–R30
Sets the stereo position of the
metronome.
Metronome Volume 0–31, MAX
Sets the volume of the
metronome.
4. Press “START p” (F2 button).
5. Press “STOP q” (F2 button).
6. Press the F1 button several times to return to the top
screen.
Recording (Rec)
Here’s how to record your performance and play it back repeatedly.
1. Press “MENU” (F2 button).
2. Use the [
H
] [
I
] buttons to select “Lesson,” and then
press “SELECT” (F2 button).
3. Use the [
H
] [
I
] buttons to select “Rec,” and then press
“SELECT” (F2 button).
The STANDBY screen appears.
4. Press “START” (F2 button) to start recording.
The screen switches to “RECORDING...,” and recording starts.
5. Press “STOP” (F1 button) to stop recording.
The PLAYBACK screen appears.
LOOP: Turn this on if
you want to play back
repeatedly. Turn this o
if you want to play back
only once.
6. Press “PLAY p” (F2 button) to play back.
To stop, press “STOP ” (F2 button).
7. When you are nished, press “BACK” (F1 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
NOTE
When you exit the REC (PLAYBACK) screen, the recorded content is
lost.
8. Press the [+] button to exit the PLAYBACK screen.
The STANDBY screen appears.
9. Press the F1 button several times to return to the top
screen.