Roland TAIKO-1 - Editing a User Sample; Edit; Renaming a User Sample (Rename); Deleting a User Sample

Importing and Playing Audio Files (User Sample)
26
Editing a User Sample (Edit)
1. On the USER SAMPLE screen, select “Edit” and then
press “SELECT” (F2 button).
The SAMPLE EDIT screen (list of user samples) appears.
2. Use the [
H
] and [
I
] buttons to select a user sample,
and press “EDIT” (F2 button).
The SAMPLE EDIT screen (edit screen) appears.
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
Play Type
MONO
When you strike the pad, the currently-
heard sound is silenced before the new
sound is heard. Notes do not overlap.
POLY
When you strike the pad repeatedly, the
sounds of the notes are heard overlapping.
LOOP ALT
The user sample plays repeatedly (loop).
Each time you strike the pad, the sound
alternately plays or stops.
Sample Gain -12–+12 [dB] Adjusts the user sample volume.
Oset 0.0– [ms]
Sets the time at which playback begins,
after the user sample starts.
MEMO
You can press “PREVIEW” (F2 button) to listen to the user sample
you’re editing.
3. Press the F1 button several times to return to the top
screen.
Renaming a User Sample (Rename)
Here’s how to rename a user sample.
1. On the USER SAMPLE screen, select “Rename” and
then press “SELECT” (F2 button).
The SAMPLE RENAME screen (list of user samples) appears.
2. Use the [
H
] and [
I
] buttons to select a user sample,
and press “RENAME” (F2 button).
The SAMPLE RENAME screen appears.
Sample name (select the character to edit)
Use the [H] and [I] buttons to move the cursor.
Select the character to input
This changes when you switch to a dierent
character type.
The character at the cursor position changes.
Use the [+] [–] buttons to edit.
& “Allowable Characters” (p. 53)
Switch the character type
This switches the character type you are inputting.
The cursor moves to the beginning of the capital letters, lowercase letters or
numbers each time you press the F2 button.
3. Edit the name.
4. Press the F1 button several times to return to the top
screen.
Deleting a User Sample (Delete)
Here’s how to delete a user sample.
1. On the USER SAMPLE screen, select “Delete” and then
press “SELECT” (F2 button).
The SAMPLE DELETE screen (list of user samples) appears.
2. Use the [
H
] and [
I
] buttons to select a user sample,
and press “Delete” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
3. To execute, press the [+] button.
4. Press the F1 button several times to return to the top
screen.