Roland TAIKO-1 - Creating a Set List (from Creating a List to Saving to a Bank)

Editing Sounds and Other Settings for Kits (Kit Edit)
24
Creating a Set List (from Creating a List to Saving to a Bank)
1. On the SET LIST screen, press “BANKLIST” (F2 button).
The BANK SELECT screen appears.
2. Use the [
H
] [
I
] buttons to select the bank, and then
press “EDIT” (F2 button).
The BANK EDIT screen appears.
3. Use the [
H
] [
I
] buttons to select the item, and then
press “SELECT” (F2 button).
Parameter
[
H
] [
I
] buttons
Explanation
Kit List Creates a set list.
Name Sets the name of the set list.
Creating a set list (Kit List)
Kits are registered in order, beginning with “#01.”
1. On the BANK EDIT screen, select “Kit List” and then
press “SELECT” (F2 button).
The BANK KIT LIST screen appears.
2. Use the [
H
] [
I
] buttons to move the cursor to “-- ADD
KIT --” and use the [+] [-] buttons to select a kit.
When you select a kit, the display moves to the next number, listed
as “-- ADD KIT --.”
Repeat this as many times necessary to register the kits.
MEMO
To delete a kit, select the kit and press “DELETE” (F2 button).
3. When you’ve nished registering kits, press “BACK”
(F1 button) to return to the previous screen.
Naming a Set List (Name)
Sets the name of the set list.
1. On the BANK EDIT screen, select “NAME” and then
press “SELECT” (F2 button).
The BANK NAME screen appears.
Bank name (select the character
to edit)
Use the [H] and [I] buttons to move the cursor.
Select the character to input
This changes when you switch to a dierent character type.
The character at the cursor position changes.
Use the [+] [–] buttons to edit.
&
“Allowable Characters” (p. 53)
Switch the character type
This switches the character type you are inputting.
The cursor moves to the beginning of the capital letters, lowercase letters or numbers each time
you press the F2 button.
1. Edit the name.
Controller Explanation
[
H
] [
I
] buttons
Move the cursor to the character that you want to change.
[+] [-] buttons Edits the character.
“A
A
a
A
1”
(F2 button)
Moves the cursor to the beginning of the capital letters,
lowercase letters or numbers.