Roland TAIKO-1 - Controlling the Sounds Using a Connected Pedal; (Pedal Control); Controlling from an External MIDI Device (Kit MIDI); Setting the Note Number for each Pad (Note Number)

Editing Sounds and Other Settings for Kits (Kit Edit)
21
Controlling the Sounds Using a Connected Pedal
(Pedal Control)
1. On the KIT EDIT screen, select “Pedal Control” and
then press “SELECT” (F2 button).
The PEDAL CONTROL screen appears.
2. Use the [
H
] [
I
] buttons to select the item, and then
use the [+] [-] buttons to change the setting.
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
Pad PAD1H–PAD2R Selects the pad to set.
Pitch Ctrl Range -24–24
Sets the amount that the pitch changes
according to how far down you press the
connected pedal.
Decay Ctrl Sw OFF, ON
Set this to “ON” to control the decay with
the connected pedal, and “OFF” if you don’t
want to control the decay with the pedal.
Level Ctrl Sw OFF, ON
Set this to “ON” to control the level with
the connected pedal, and “OFF” if you don’t
want to control the level with the pedal.
To set whether the connected pedal controls the pitch, decay or
level, congure the settings in “Conguring the Pedal Jacks and
Shortcut Settings (Control Settings)” (p. 36).
3. Press the F1 button several times to return to the top
screen.
Controlling from an External MIDI Device (Kit MIDI)
1. On the KIT EDIT screen, select “Kit MIDI” and then
press “SELECT” (F2 button).
The KIT MIDI screen appears.
The KIT MIDI screen contains the following settings.
Setting the Note Number for Each Pad (Note Number) page 21
Setting the MIDI Channel for Each Pad (Channel) page 22
Setting the Gate Time for Each Pad (Gate Time) page 22
2. Use the [
H
] [
I
] buttons to select the item, and then
press “SELECT” (F2 button).
Setting the Note Number for Each Pad (Note Number)
This shows how to set the note numbers for each pad.
1. On the KIT MIDI screen, select “Note Number” and
then press “SELECT” (F2 button).
The KIT MIDI NOTE NUMBER screen appears.
2. Use the [
H
] [
I
] buttons to select the item, and then
use the [+] [-] buttons to change the setting.
Parameter
[
H
] [
I
] buttons
Value
[+] [-] buttons
Explanation
PAD1H
0 (C-)–
127 (G9), OFF
0 (C-)–127 (G9): Sets the MIDI note number
transmitted and received by each pad.
OFF: Note messages are not transmitted
or received.
PAD1R
PAD2H
PAD2R
3. Press the F1 button several times to return to the top
screen.