Roland TAIKO-1 - Renumbering User Samples to Eliminate Blanks (Renumber); Optimizing the User Sample Area; (Optimize); Deleting All User Samples

Importing and Playing Audio Files (User Sample)
27
Renumbering User Samples to Eliminate Blanks
(Renumber)
After repeatedly importing and deleting user samples, the numbers
may get out of series.
This function lets you reorganize the user samples so that they are in
series, eliminating the blanks. The user sample assignments for kits are
also updated so that they sound correct.
NOTE
If you executed RENUMBER, and then load previously-saved backup
data or kit backup data (not including user samples), the user samples
assigned to the kit are no longer correctly reproduced.
1. On the USER SAMPLE screen, select “Renumber” and
then press “SELECT” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
2. To execute, press the [+] button.
3. Press the F1 button several times to return to the top
screen.
Optimizing the User Sample Area (Optimize)
If you repeatedly import and delete user samples, the user sample area
might become fragmented, reducing the number of user samples that
can be loaded.
This function optimizes the area so that user samples can be loaded.
NOTE
5 Be sure to back up your data before executing this function (p. 33).
5 This process might take more than an hour in some cases (depending on the
number and size of the user samples).
5 Never turn o the power while this operation is in progress. If you turn o the
power, your user samples might be lost.
5 In some cases, optimizing may not be eective.
1. On the USER SAMPLE screen, select “Optimize” and
then press “SELECT” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
2. To execute, press the [+] button.
Deleting All User Samples (Delete All)
This function deletes all user samples in the user memory.
NOTE
All user samples used in kits are also deleted. Pads to which a user
sample is assigned no longer produce sound.
1. On the USER SAMPLE screen, select “Delete All” and
then press “SELECT” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
2. To execute, press the [+] button.
3. Press the F1 button several times to return to the top
screen.