Roland TAIKO-1 - Connecting an Already-Paired Mobile Device; Playing Music from a Mobile Device; Checking the Bluetooth Status (Bluetooth Status); Resetting the Bluetooth Pairing Settings

Using the Bluetooth® Functionality
32
Connecting an Already-Paired Mobile Device
1. Turn on the Bluetooth function of the mobile device.
MEMO
5 If you were unable to establish a connection using the procedure above, tap
“TAIKO-1 Audio” that is displayed in the Bluetooth device screen of the mobile
device.
5 To disconnect, either turn this instrument’s Bluetooth Audio function “OFF”
(“MENU”
0
“Bluetooth”
0
“Setup”
0
turn “Bluetooth
” OFF) or turn the
mobile device’s Bluetooth function o.
Playing Music from a Mobile Device
1. Connect your mobile device via Bluetooth.
2. On the mobile device, use a music app to play back
music.
The sound is heard from the TAIKO-1.
* To adjust the playback volume, adjust the volume on your mobile device.
Checking the Bluetooth Status (Bluetooth Status)
1. Press “MENU” (F2 button).
The MENU screen appears.
2. Use the [
H
] [
I
] buttons to select “Bluetooth,” and then
press “SELECT” (F2 button).
The Bluetooth screen appears.
3. Use the [
H
] [
I
] buttons to select “Bluetooth Status,”
and then press “SELECT” (F2 button).
The BLUETOOTH STATUS screen appears.
4. Press the F1 button several times to return to the top
screen.
Resetting the Bluetooth Pairing Settings (Reset)
1. Press “MENU” (F2 button).
The MENU screen appears.
2. Use the [
H
] [
I
] buttons to select “Bluetooth,” and then
press “SELECT” (F2 button).
The Bluetooth screen appears.
3. Use the [
H
] [
I
] buttons to select “Reset,” and then
press “SELECT” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
4. Press “EXECUTE” (F2 button).
5. Press the F1 button several times to return to the top
screen.