Roland TAIKO-1 - Troubleshooting

41
Troubleshooting
Problem Items to Check Action Page
Troubles with sound
No sound / Insucient volume
Is the product correctly connected to the external devices? Check the connections. p. 9
Could the instrument’s volume be lowered? Use the [
] [ ] buttons to adjust. p. 8
Could the volume of the connected amplied speaker be lowered? Adjust the volume of the connected amplied speakers. –
Could the volume be lowered on the smartphone or other device
that’s connected to the MIX IN jack or via Bluetooth?
Adjust this on your smartphone. –
Could the MIDI “Local Control” be “OFF”? Normally, this should be set to “ON.” p. 38
A specic pad does not sound
Are the cables correctly connected to each pad and pedal? Check the connections. p. 5
Could the instrument be “OFF”? Assign an instrument. p. 16
Could the pad’s volume be lowered?
Could the kit’s volume be lowered?
Adjust the pad’s volume.
Adjust the kit’s volume.
p. 16
p. 20
Could user samples have been deleted?
If you delete the user sample that’s assigned to a pad, it no longer
produces sound.
Either load the user sample once again, or assign a dierent
instrument.
p. 25
p. 16
Could the Active Pad be “OFF”? Turn Active Pad “ON.” p. 29
Troubles with USB ash drives
USB ash drive is connected but
not recognized; or data is not
visible
Is the USB ash drive formatted correctly? Format the USB ash drive on this instrument. p. 35
Can’t import audio les
Is the audio le format correct? Check the audio le format, le name, and le name extension. p. 25
Is the audio le in the correct location? Check the location of the audio le. p. 12
Could a large number of audio les be in the folder? Keep the number of audio les in a folder to 200 or fewer. –
Troubles with USB
Can’t communicate with a
computer
Is the USB cable connected correctly? Check the connections. p. 9
Troubles with MIDI
No sound
Is the USB cable connected correctly? Check the connections. p. 9
Is the MIDI channel set correctly?
Set the MIDI channels of the product and external MIDI device to
the same setting.
p. 38
Has the note number been set properly? Set the pad’s “NOTE NO.” p. 21
Problems with Bluetooth functionality
Problem Items to Check Action Page
“TAIKO-1” is not shown on your
smartphone
Could this instrument’s Bluetooth function be “OFF”?
Turn this instrument’s Bluetooth function “ON.”
“MENU” (F2)
0
”Bluetooth”
0
”Setup”
0
ON
Bluetooth audio function:
When you initiate pairing ([F2] button), the device name “TAIKO-1
AUDIO” appears on your smartphone.
p. 31
Can’t connect to Bluetooth
audio.
If your smartphone’s Bluetooth device list shows “TAIKO-1 AUDIO”
In your smartphone’s settings, temporarily remove the registration
of the “TAIKO-1 AUDIO” Bluetooth device, turn the Bluetooth
function o and then on again, and execute pairing once again.
–
If your smartphone’s Bluetooth device list does not show “TAIKO-1
AUDIO”
In your smartphone’s settings, turn the Bluetooth function o and
then on again, and then initiate pairing from the TAIKO-1 to pair it
once again.
–
Can’t connect to Bluetooth MIDI
For the Bluetooth MIDI function, execute pairing not via the Bluetooth settings of your smartphone, but by selecting the settings
“TAIKO-1MIDI” setting in your Bluetooth MIDI-compatible app (such as GarageBand). Even if your smartphone’s Bluetooth device list shows
“TAIKO-1 MIDI,” do not tap it. If you tapped it by mistake, cancel “TAIKO-1 MIDI,” turn the Bluetooth function o and then on, and make the
connection again.
–
A paired smartphone does not
connect
If connection occurs but is immediately severed, turning the smartphone’s Bluetooth function o and then on again might make
connection succeed.
–