Roland TAIKO-1 - Deleting Backup Files (Delete Backup); Initialized a USB Flash Drive; (USB Memory Format)

Backing up to USB Flash Drive (USB Memory)
35
Deleting Backup Files (Delete Backup)
Here’s how to delete unneeded backup data (including user samples)
from the USB ash drive.
1. On the USB MEMORY screen, select “Delete Backup”
and then press “SELECT” (F2 button).
The DELETE BACKUP screen appears.
Parameter
[
H
] [
I
] buttons
Explanation
All All settings (backup data) are deleted.
1 Kit Only one kit (kit backup data) is deleted.
Deleting All Kits (DELETE BACKUP ALL)
2. On the DELETE BACKUP screen, select “All” and then
press “SELECT” (F2 button).
3. Use the [+] [–] buttons to select the data to delete.
When you select the number in which data is saved, the
corresponding lename is shown.
4. Press “EXECUTE” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
5. To execute, press the [+] button.
6. Press the F1 button several times to return to the top
screen.
Deleting One Kit (DELETE BACKUP 1 KIT)
2. On the DELETE BACKUP screen, select “1 Kit” and then
press “SELECT” (F2 button).
3. Use the [+] [–] buttons to select the kit to delete.
When you select the number to which a kit is saved, the backup
lename is shown.
4. Press “EXECUTE” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
5. To execute, press the [+] button.
6. Press the F1 button several times to return to the top
screen.
Initialized a USB Flash Drive (USB Memory Format)
Here’s how to format a USB ash drive.
* When using a USB ash drive for the rst time, you must format it using
this instrument.
NOTE
5 If the le system of the USB ash drive is not currently FAT (FAT16) or FAT32,
you may not be able to correctly format it on the TAIKO-1. In this case, use your
computer to change the le system of the drive to FAT (FAT16) or FAT32 before
initializing it on the TAIKO-1.
5 When you format a USB ash drive, all data on the USB ash drive is erased.
1. On the USB MEMORY screen, select “USB Memory
Format” and then press “SELECT” (F2 button).
A conrmation message appears.
If you decide to cancel, press “CANCEL” (F1 button).
2. To execute, press the [+] button.