Roland V-8HD - Page 52

52
Other Features
Loading
Here’s how to load the macro settings that are saved on a USB ash
drive. Loading the settings overwrites the current settings for the
macros (1–100).
1. Press the [MENU] button0“MACRO”0select “LOAD
FROM USB MEMORY,” and press the [VALUE] knob.
The macro setting les in the USB ash drive are listed.
2. Use the [VALUE] knob to select the macro settings
le that you want to load, and press the [VALUE] knob.
A conrmation message appears.
* If you decide to cancel, press the [EXIT] button.
3. Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The macro settings are loaded. When the operation is nished, the
message “COMPLETE” appears.
4. Press the [MENU] button to close the menu.