11
KIT CUSTOMIZE
AMBIENCE
1. Press the [AMBIENCE] button.
The AMBIENCE screen appears.
2. Use the PAGE [UP] [DOWN] buttons to access the editing screen.
3. Use cursor buttons to select a parameter, and use the [–] [+] buttons or the dial to edit the value.
4. Press the [KIT] button to return to the DRUM KIT screen.
AMBIENCE LEVEL (page 1)
Parameter Value Explanation
[F1] button ROOM OFF, ROOM ON Turns the room ambience (the type and size of room) eect on/o.
[F2] button REV OFF, REV ON Turns the reverb (reverberation) eect on/o.
[F3] button ENHNC OFF, ENHNC ON Turns the stereo enhancer (spaciousness) eect on/o.
Room ([R1] knob) -INF–+6.0 dB Volume of room ambience
Reverb ([R2] knob) -INF–+6.0 dB Volume of reverb
Stereo Enhancer ([R3] knob) -INF–+6.0 dB Volume of stereo enhancer
ROOM (page 2)
Parameter Value Explanation
[F4] button OFF, ROOM ON Turns room ambience on/o.
ROOM tab
Type ([R1] knob)
BEACH, LIVING ROOM, BATH ROOM,
STUDIO, GARAGE, LOCKER ROOM,
THEATER, CAVE, GYMNASIUM,
DOME STADIUM, BOOTH A, BOOTH
B, STUDIO A, STUDIO B, BASEMENT,
JAZZ CLUB, ROCK CLUB, BALLROOM,
GATE, CONCERT HALL, SPORTS
ARENA, EXPO HALL, BOTTLE, CITY,
SPIRAL
Type of room reverberation
Level ([R2] knob) -INF–+6.0 dB Volume of room ambience
Room Size TINY, SMALL, MEDIUM, LARGE, HUGE Size of the room
Room Shape 0–100 Room shape and reverberation length
Wall Type
CURTAIN, CLOTH, WOOD,
PLASTER, CONCRETE, GLASS
Wall material
Mic Position
NEXT DOOR, LOW FLOOR,
LOW, MID LOW, MID,
MID HIGH, HIGH, CEILING A, CEILING B
Tonal change caused by mic position
SEND tab
Room Send Volume -INF–+6.0 dB
Amount of room ambience applied to each pad
If you press the [F5] (H&R) button to turn it “ON,” you can simultaneously make settings for the head
area and rim area, etc.
To Next Page
Loading...
