Roland V-Drums TD-50 - User Sample Import and Assignment; Importing Audio Files to TD-50; Assigning User Samples to Instruments

21
CLICK
1. Press the [CLICK] button.
The CLICK screen appears.
Parameter Value Explanation
[F5] button OFF, ON Turns click on/o.
TEMPO tab
Tempo*1 20–260 Tempo
Beat*1 1–9 Number of beats per measure
Rhythm
–
Interval of the click
SOUND tab
Sound
METRONOME, CLICK, VOICE, BEEP 1,
BEEP 2, TEK CLICK, STICKS, CLAVES,
WOOD BLOCK, COWBELL, TRIANGLE,
TAMBOURINE, MARACAS, CABASA
Sound for the click
Level -INF–+6.0 dB Volume of click
LED Ref OFF, ON Species whether the [CLICK] button blinks in time with the click (ON) or does not blink (OFF).
OTHER tab
Click Pan L30–CTR (CENTER)–R30 Stereo position of the click
Amb(Reverb)Send -INF–+6.0 dB
Depth of ambience reverb
Applying ambience reverb makes the click easier to hear.
MEMO
The eect specied by the ambience reverb setting is applied. This means that reverb must be
turned on (p. 12).
Tap Sw OFF, ON
You can specify the tempo by striking the pad specied by Tap Pad or by pressing a button
(Tap Tempo).
Tap Pad KICK–PREVIEW Select the pad or button that can be struck or pressed to set the tap tempo.
*1 This cannot be changed while playing back a drum performance data song (p. 46) or recorded data.
Quiet Count settings
1. In the CLICK screen, press the [F4] (QUIET CNT) button.
2. Press the [F2] (SETUP) button.
The setting screen appears.
3. Use cursor buttons to select a parameter, and use the [–] [+] buttons or the dial to edit the value.
Parameter Value Explanation
Measures 2, 4, 8, 16 (Measures)
Specify the length (measures) of the interval for which the click will alternate between “Sounding”
and “Quiet.”
Quiet
Of the measures specied by “Measures,” this setting species the length of the measures that will be “Quiet.”
RANDOM The length of the Quiet interval will randomly change each time.
1, 2, 4
Species the length (number of measures) of the Quiet interval.
* This setting cannot be longer than half of the Measures value.