Roland V-Drums TD-50 - Power Management; Turning the Unit On and Off

9
KIT CUSTOMIZE
RIDE
Parameter Value Explanation
INST tab
Size 1.0–40.0 Cymbal diameter
Thickness THIN-5–STANDARD–THICK +5 Thickness of the cymbal
BASIC 1 tab
Muing OFF, TAPE1–19 Muing (muting) setting
Sizzle Type OFF, RIVET, CHAIN, BEADS Type of sizzle
Sizzle Amount -3–+3 Amount of sizzle
BASIC 2 tab
Ping Color*1 LIGHT2, 1, STANDARD, HEAVY1, 2 Tonal character of the ride’s ping sound
Ping Level*1 -4–NORMAL–+5 Volume of the ride’s ping sound
*1 For some instruments, these settings are not available.
MIC POSITION (page 2)
You can edit the mic position and volume for each instrument.
* For some instruments, these settings are not available.
Parameter Value Explanation
MIC POS tab
Mic Position OUTSIDE4–STANDARD–INSIDE4 Tonal change caused by mic position
ELEMENT tab
Overhead -INF–+6.0 dB Volume of overhead mic
Room -INF–+6.0 dB Volume of room mic
WIDTH tab
Mic Width -5–+5 Spread of the overhead mic and room mic
TRANSIENT (page 3)
You can adjust the attack and release (transient) for each instrument.
* For some instruments, these settings are not available.
Parameter Value Explanation
[F4] button OFF, TRANSIENT ON Turns the transient eect on/o.
Time ([R1] knob) 1–10 Time over which the attack changes
Attack ([R2] knob) -100–+100 Adjustment of the attack
Release ([R3] knob) -100–+100 Adjustment of the release
Gain -12.0–+6.0 dB Volume following transient adjustment