Roland V-Drums TD-50 - Page 8

8
KIT CUSTOMIZE
TOM A/TOM BRUSH
Parameter Value Explanation
INST tab
Shell Depth 1.0–30.0 Depth of the shell
Head Type CLEAR, COATED, PINSTRIPE Type of head
BASIC 1 tab
Tuning -100–100 Tuning of the head
Muing OFF, TAPE1–5, FELT1–4 Muing (muting) setting
Snare Buzz OFF, 1–8 Resonance to the snare
HI-HAT
Parameter Value Explanation
INST tab
Size 1.0–40.0 Hi-hat diameter
Thickness THIN-5–STANDARD–THICK +5 Thickness of the hi-hat
BASIC 1 tab
Fixed NORMAL, PRESS, CLOSE, HALF, OPEN
Openness of the hi-hat
If something other than “NORMAL” is selected, the openness of the hi-hat does not change,
regardless of how you press the hi-hat pedal.
ADVANCED tab
Pedal HH Volume -INF–+6.0 dB
Volume of pedal hi-hat
MEMO
The “Pedal HH Volume” can also be edited from the MIXER DRUM KIT VOLUME screen
(KIT VOL tab) of the MIXER (p. 13).
MEMO
The closed hi-hat position (Fixed = CLOSE) can be enabled by pressing an optional footswitch or hitting a pad switch. Please refer to “CONTROL” (p. 31).
CRASH/CHINA/SPLASH/STACKED CYMBAL
Parameter Value Explanation
INST tab
Size 1.0–40.0 Cymbal diameter
Thickness THIN-5–STANDARD–THICK +5 Thickness of the cymbal
BASIC 1 tab
Muing OFF, TAPE1–19 Muing (muting) setting
Sizzle Type OFF, RIVET, CHAIN, BEADS Type of sizzle
Sizzle Amount -3–+3 Amount of sizzle