Roland V-Drums TD-50 - Control

31
SETUP
CONTROL
Parameter Value Explanation
FOOT SW tab
Foot Switch 1 Func(SW1),
Foot Switch 2 Func(SW2)
See below
Assigns a function to a footswitch (separately sold: BOSS FS-5U, FS-6) connected to the TD-50.
Connecting an FS-5U
SW 2SW 1
TIP
Stereo 1/4” phone type
1/4” phone type x 2
RING
POLARITY switch
* If you use a mono cable to connect a single FS-5U, it will operate as SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
Stereo 1/4” phone type
Stereo 1/4” phone type
SW 2
SW 1
MODE/POLARITY switch
PAD CTRL tab
Aux3 Head Func,
Aux3 Rim Func
See below
Assigns functions to a pad connected to TRIGGER IN jack 13/AUX3.
You can assign separate functions to the head and to the rim.
Aux4 Head Func,
Aux4 Rim Func
Assigns functions to a pad connected to TRIGGER IN jack 14/AUX4.
You can assign separate functions to the head and to the rim.
Functions that you can assign to a footswitch or pad
Value Explanation
OFF No function is assigned.
KIT# INC Calls up the previous kit.
KIT# DEC Calls up the next kit.
SETLIST# INC Calls up the previous set list.
SETLIST# DEC Calls up the next set list.
SONG# INC Calls up the previous song.
SONG# DEC Calls up the next song.
SONG PLAY Play the song.
SONG STOP Stop the song.
SONG TOP Return to the beginning of the song.
SONG PLAY/STOP Play/stop the song.
Value Explanation
SONG AB REPEAT Species A-B repeat.
MFX 1 ON/OFF Turns on/o the multi-eect 1.
MFX 2 ON/OFF Turns on/o the multi-eect 2.
MFX 3 ON/OFF Turns on/o the multi-eect 3.
XSTICK ON/OFF*1
Switches between sounding or not sounding
the cross-stick sound.
FIXED HH ON/OFF
Switches between setting the hi-hat Fixed
(p. 8) to “CLOSE” or not.
ALL SOUND OFF
Stops the currently-sounding drum
performance sound or user sample playback.
*1 If the trigger input (p. 22) of a digitally-connected pad (such as the PD-140DS) is assigned to snare, “XSTICK ON/OFF” has no eect.