13
KIT CUSTOMIZE
MIXER
1. Press the [MIXER] button.
The MIXER screen appears.
2. Use the PAGE [UP] [DOWN] buttons to access the editing screen.
3. Use cursor buttons to select a parameter, and use the [–] [+] buttons or the dial to edit the value.
4. Press the [KIT] button to return to the DRUM KIT screen.
MIXER VOLUME (page 1)
For each drum kit, you can adjust the volume of each pad and adjust the overall volume of the entire drum kit.
You can also adjust how the volume responds to the striking force.
Parameter Value Explanation
VOLUME tab
Volume -INF–+6.0 dB Volume of each pad
PAN tab
Pan L30–CTR–R30 Stereo position of each pad
MIN VOL tab
Pad Minimum Volume*1 0–15
Minimum volume of each pad
This lets you increase the volume of the softest hits while preserving the volume of the strongest
hits. This can make it easier to hear ghost notes on the snare or legato notes on the ride cymbal.
Pad Maximum Volume*1 -5–0
Maximum volume of each pad
This lets you decrease the volume of the strongest hits while preserving their nuances.
You can limit the volume while preserving the nuances of the strongest hits.
* This is available only for pads that support digital connection and for input from the MIDI IN
connector.
KIT VOL tab
Kit Volume*2
-INF–+6.0 dB
Drum kit volume
Pedal HH Volume Pedal hi-hat volume
Xstick Volume Cross-stick volume
*1 Use the cursor [
H
] [
I
] buttons to choose whether you’re setting the Pad Minimum Volume or the Pad Maximum Volume.
*2 You can also set “Kit Volume” in the KIT SETTINGS screen (VOLUME tab) (p. 3).
MEMO
If you press the [F5] (H&R) button to turn it “ON,” you can simultaneously make settings for the head area and rim area, etc.
To Next Page
Loading...
