Roland V-Drums TD-50 - Panel Connections and Mounting

7
KIT CUSTOMIZE
KICK A
Parameter Value Explanation
INST tab
Shell Depth 1.0–30.0 Depth of the shell
Head Type CLEAR, COATED, PINSTRIPE Type of head
BASIC 1 tab
Tuning -100–100 Tuning of the head
Muing
OFF, TAPE1–4, BLANKET1–3, WEIGHT1, 2 Muing (muting) setting
Beater Type FELT1, 2, WOOD, PLASTIC1, 2 Type of beater
BASIC 2 tab
Snare Buzz OFF, 1–8 Resonance to the snare
Low Level -5–NORMAL–+5 Volume of low-frequency sound
Low Decay -2–NORMAL–+2 Decay length of low-frequency sound
ADVANCED tab
Kit Resonance OFF, 1–8 Amount of resonance for the entire drum kit
SNARE A/CROSS STICK/SNARE BRUSH
Parameter Value Explanation
INST tab
Shell Depth*1 1.0–30.0 Depth of the shell
Head Type*1 CLEAR, COATED, PINSTRIPE Type of head
BASIC 1 tab
Tuning -100–100 Tuning of the head
Muing OFF, TAPE1–7, DONUT1, 2 Muing (muting) setting
Overtone*1, *2 -5–NORMAL–+5 Amount of overtone components
BASIC 2 tab
Strainer Adj.*2 LOOSE1–3, MEDIUM1–3, TIGHT1–3 Tension of the strainer (resonating cords)
Wire Type*2 TYPE1–3 Type of strainer
Wire Level*2 -4–NORMAL–+5 Volume of strainer
ADVANCED tab
XStick Inst*3 1–5 Cross-stick sound selection
XStick Inst Volume*3 -INF–+6.0 dB
Cross-stick sound volume
MEMO
The “XStick Volume” can also be edited from the MIXER DRUM KIT VOLUME screen (KIT VOL tab)
of the MIXER (p. 13).
*1 Unavailable if the instrument group is CROSS STICK.
*2 Unavailable if the instrument group is SNARE BRUSH.
*3 Only if the SNARE A/CROSS STICK instrument is assigned to the rim of the snare (or to the rim of a digitally connected pad that is assigned to snare)
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.