23
TRIGGER
Making detailed settings for digitally-connected pads
1. Press the [TRIGGER] button.
2. Press the PAGE [UP] button to access page 1 (TRIG BASIC).
3. Press the [F2] (DIGITAL) button.
4. Press the [F5] (ADVANCED) button.
The DIGITAL TRIGGER ADVANCED screen appears.
5. Use cursor buttons to select a parameter, and use the [–] [+] buttons or the dial to edit the value.
6. Press the [F4] (EXIT) button to return to the DIGITAL TRIGGER IN screen.
* The parameters that can be set dier depending on the type of pad.
Parameter Value Explanation
Position Adjust 1–10
Adjusts how the tonal character is aected by strike position.
Lower values adjust toward the center, and higher values adjust toward the circumference.
XStick Detect Sens OFF, 1–5
Adjusts how easy it is to use cross-stick playing technique. If this is “OFF,” cross-stick technique is
unavailable.
Choke Sens OFF, 1–5 Adjusts the sensitivity of choking technique. If this is “OFF,” choking technique is unavailable.
Bell Gain 0–3.2
Adjusts the balance between the force of a strike on the bell (bell shot technique) and the loudness
of the sound. With higher values of this setting, a high volume can be produced even by a soft
strike on the bell.
Trig Type list
Used modes Trig Type
Rim
shot
Bell
shot
Positional sensing
Choke
play
Head Rim
KD-A22 KDA22 – – – – –
KD-140 KD140 – – – – –
KD-120 KD120 – – – – –
KD-85 KD85 – – – – –
KD-9 KD9 – – – – –
KD-8 KD8 – – – – –
KD-7 KD7 – – – – –
KT-10 KT10 – – – – –
PD-128S,
PD-128
PD128
(
–
( (
–
PD-125XS,
PD-125X
PD125X
(
–
( (
–
PD-125 PD125
(
–
( (
–
PD-108 PD108
(
–
( (
–
PD-105X PD105X
(
–
( (
–
PD-105 PD105
(
–
( (
–
PD-85 PD85
(
–
( (
–
PDX-100 PDX100
(
–
( (
–
PDX-8 PDX8
(
– – – –
PDX-6 PDX6
(
– – – –
PD-8 PD8
(
– – –
(
VH-13 VH13
(
– – –
(
VH-12 VH12
(
– – –
(
VH-11 VH11
(
– – –
(
CY-15R CY15R
( ( (
–
(
CY-14C CY14C
(
–
(
–
(
CY-13R CY13R
( ( (
–
(
CY-12C CY12C
(
–
(
–
(
CY-12R/C CY12R/C
( ( (
–
(
Used modes Trig Type
Rim
shot
Bell
shot
Positional sensing
Choke
play
Head Rim
CY-8 CY8
(
– – –
(
CY-5 CY5
(
– – –
(
BT-1
BT1 – – – – –
BT1 SENS*1 – – – – –
Generic pads
PAD1
(
– – –
(
PAD2
(
– – – –
PAD3
(
– – –
(
RT-30K RT30K – – – – –
RT-30HR RT30HR
(
– – – –
RT-30H
RT30H SN*2 – – – – –
RT30H TM*3 – – – – –
RT-10K RT10K – – – – –
RT-10S RT10S
(
– – – –
RT-10T RT10T – – – – –
*1 When using the BT-1, it is possible to further increase the sensitivity for soft strikes,
but this increases the possibility of unwanted triggering by vibration from the
surroundings.
*2 Select this if you attach an RT-30H to the snare.
*3 Select this if you attach an RT-30H to a tom.