Roland VersaStudio BN-20 - Page 46

Using Metallic Silver Ink
44
Chapter 2 Fully Utilizing the Machine
Chapter 2 Fully Utilizing the Machine

Click [Dene Custom Colors].
The Color Settings screen opens allowing you to create col-
ors.

Enter values for [Red (R)], [Green (G)], and [Blue (B)].
The BN-20 driver identies the color specied using the values entered here as the metallic color used
in printing, and outputs the color.
2. Creating Print Data

Create the print data using application software for creating drawings.
Set the Document Color Mode to [RGB]. Because CMYK is converted to RGB when outputting in CMYK
mode, the color (RGB value) specied as the cutting line may change. In this case, it is not possible
to print using a metallic color or to perform cutting because the color specied for the driver as the
cutting line and the color output from the application software dier.