Roper REP34800 - Hot Surface Indicator Lights

USiNG THE
SURFACE ELEMENTS
Hot surface indicator lights
Single hot surface indicator light
(on some models)
The Hot Surface indicator
light on the cooktop surface
will glow when the surface
elements are turned on. The
Hot Surface indicator light will
continue to glow as long as
the elements are too hot to
touch, even after they are
turned off.
Four hot surface indicator lights
(on other models)
The Hot Surface indicator
lights on the cooktop surface
will glow when their corre-
sponding surface elements are
turned on. The Hot Surface
indicator lights will continue to
glow as long as the elements
are too hot to touch, even after
they are turned off.
NOTE : Heat from the oven
vent may cause the left rear
Hot Surface indicator light to
glow as a warning that the
area is warm to touch.
21