EasyManua.ls Logo

Roper REP34800 - Sweep-Through Base; Removable Control Console Glass

Roper REP34800
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONVENIENT
CLEANING FEATURES
CARING FOR YOUR RANGE
Sweep-through base
The sweep-through base is designed to allow
easy cleaning under the range. It also allows
better access to the levelling legs once the
range has been set in place.
Sweep-through
base
To sweep underneath the range, simply
remove the storage drawer (see Installation
Instructions sheet for instructions on removing
the storage drawer).
Removable control console glass
The control console glass can be removed to
allow easy cleaning of both sides of the glass
and the control panel.
Use a sponge with warm, soapy water. Do not
clean the electronics behind the glass. Liquids
can damage the electronics.
To remove the control console glass:
1. Remove surface element control knobs by
pulling them straight off.
2. Lift the cover on top of the control console
and remove the fluorescent lamp (see
instructions, page 39).
3. Remove the control console glass by
pulling it slightly forward and straight up.
36

Table of Contents

Related product manuals