Rosslare AC-015 Hardware Installation

Modes of Operation
AC-015 Hardware Installation and Programming Manual 19
6.2 Bypass Mode
The Mode LED is orange.
 In this mode the controller is in the lowest level of security.
 The Controller’s keypad is used for changing modes of operation
and activating the Lock Strike by the employee codes or by
pressing *.
 The Lock Strike remains active according to the programmed
Release Time.
 If the Lock Strike is defined as Normally Closed, it is always active.
If the Lock Strike is defined as Normally Open, it can be activated
in the following ways:
 Pressing the REX button
 Entering a valid code (from an outside reader only using a
proximity code or a PIN code)
6.3 Secure Mode
The Mode LED is red.
 In this mode, the controller is in the highest level of security.
 The controller’s keypad is used for changing modes of operation
and activating the Lock Strike by the employee codes.
 The Lock Strike remains active according to the programmed
Release Time.
 In addition, it is possible to activate the Lock Strike in the
following ways:
 Pressing the REX button
 Entering Master codes (from an outside reader only using a
proximity code or a PIN code)
Mode
Door
Orange
Mode
Door
Red

Rosslare AC-015 Specifications

General

Brand	Rosslare
Model	AC-015
Category	IP Access Controllers
Language	English