Rosslare AC-015 - Changing the Fail Safe and Fail Secure Operations, Alarm Sound Time, and Door Release Time

Programming Instructions
AC-015 Hardware Installation and Programming Manual 29
There are
four different ways to program the Normal/Bypass code
and door chime:
 Disable both Bypass code and the door
chime – enter the code 0000.
 Disable Bypass code and enable the
door chime – enter the code 0001.
 Enable Bypass code and disable the
door chime – enter any code ending
with 0.
 Enable Bypass code and enable the
door chime – enter a code not ending
with 0.
You hear three beeps.
The system returns to Normal mode.
10.8 Changing the Fail Safe and Fail Secure
Operations, Alarm Sound Time, and Door
Release Time
To change the door release time:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The Mode indicator flashes green.
3. Construct a code using the following instructions:
Mode
Door
Green
Mode
Door
Green
Mode
Door
Green
Green