Changing the Modes of Operation
AC-015 Hardware Installation and Programming Manual 21
7.3 Changing from Normal Mode to Bypass
Mode
See Section 10.7 to create/modify the Normal/Bypass code.
To change from Normal mode to Bypass mode:
1. Enter the 4 digit Normal/Bypass code.
Mode LED flashes orange.
2. Press # to confirm the mode change.
Mode LED turns orange.
7.4 Changing from Bypass Mode to Normal
Mode
See Section 10.7 to create/modify the Normal/Bypass code.
To change from Bypass mode to Normal mode:
1. Enter the 4-digit Normal/Bypass code.
Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
To Next Page
Loading...
