Rosslare AC-015 Hardware Installation

Introduction
AC-015 Hardware Installation and Programming Manual 9
additional employees at a later time or to delete a proximity or PIN
code if one is lost or stolen. A record form is enclosed for your
reference to assist you with your record keeping.
The AC-015 is capable of learning both PIN codes (keyboard based, 4-
digit codes) and proximity codes (received from proximity card
reader). The system can be connected to up to two reader sensors. An
external reader is to be located outside the restricted area, and it is
always required. The second reader is for internal installation. Readers
need to be a Wiegand 26-Bit interface type, and may be a proximity
card reader (for proximity codes), keyboard (for PIN type codes), or
combined PIN/proximity reader.
A PIN reader, connected to indoor reader input, can perform all the
operations usually performed from the onboard keyboard (depending
on the PIN reader model). A PIN reader connected to an external
reader input will behave similarly, but access level is different on
certain AC-015 status of operation.
1.1 Key Features
 RS-232 PC Interface
 Multi-language PC software
 Supports up to 500 employees
 Real-time system monitoring
 Supports two Wiegand 26-Bit compatible readers
 Three modes of operation
 Normal mode
 Bypass mode
 Secure mode
 Lock Strike Relay Output
 Request-to-Exit (REX) button
 Internal siren
 Comes with security screw and security tool
 Two status/programming Interface LEDs

Rosslare AC-015 Specifications

General

Brand	Rosslare
Model	AC-015
Category	IP Access Controllers
Language	English