Rosslare AC-015 - Changing the Modes of Operation; Changing from Normal to Secure Mode; Changing from Secure Mode to Normal Mode

Changing the Modes of Operation
20 AC-015 Hardware Installation and Programming Manual
7. Changing the Modes of
Operation
7.1 Changing from Normal to Secure Mode
The default factory setting for the Normal/Secure code is 3838.
To change from Normal mode to Secure mode:
1. Enter the 4-digit Normal/Secure code.
Mode LED flashes red.
2. Press # to confirm the mode change.
The Mode LED turns red.
7.2 Changing from Secure Mode to Normal
Mode
The default factory setting for the Normal/Secure code is 3838.
To change from Secure mode to Normal mode:
1. Enter the 4-digit Normal/Secure code.
Mode LED flashes green.
2. Press # to confirm the mode change.
The Mode LED turns green.
Mode
Door
Green
Mode
Door
Red
Mode
Door
Red
Mode
Door
Red
Mode
Door
Green
Mode
Door
Green