Programming Instructions
28 AC-015 Hardware Installation and Programming Manual
3. Enter the new 4-digit code you wish to set
as the Programming code.
You hear three beeps.
The system returns to Normal mode.
The Programming code cannot be erased. Programming code
0000 is not valid and does not erase the Programming code.
10.6 Changing the Normal/Secure Code
The default Secure code is 3838.
To change the Normal/Secure code:
1. Enter Programming mode.
2. Press 4 to enter Menu 4.
The Mode indicator flashes red.
3. Enter the new Normal/Secure code.
You hear three beeps.
The system returns to Normal mode.
10.7 Changing the Normal/Bypass Code
The Normal/Bypass code also controls the Chime function for the AC-
015. You may set the code to 4 available options.
To change the Normal/Bypass code:
1. Enter Programming mode.
2. Press 5.
The Mode indicator flashes orange.
To Next Page
Loading...
