Royal ALPHA9155SC - Specifications and Safety

95
(Continued) X/Z MANAGEMENT REPORTS
TO TAKE A FULL REPORT
"X" or "Z" + [AMOUNT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the [CLERK]
key, or if you did NOT program a Manager Password, go to Step 3.
3. PRESS the [AMOUNT TEND/TOTAL] key.
Important: A Full Reading must be closed out in the "Z" position.
SEE ILLUSTRATION OF A FULL REPORT ON THE NEXT PAGE.
TO TAKE A (WEEKLY or MONTHLY) FULL REPORT
"X" or "Z" + [PO] + [AMOUNT TEND/TOTAL]
1. Turn the key to the "X" or "Z" position as desired.
2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the [CLERK]
key, or if you did NOT program a Manager Password, go to Step 3.
3. PRESS [PO], then PRESS the [AMOUNT TEND/TOTAL] key.