Royal ALPHA9155SC - Training Mode; Shut Off Training Mode

39
(Continued) PRICE LOOK-UP (PLU)
TO SEARCH A VACANT PLU NUMBER
“PRG” + (0) + [PLU]
To program a new PLU, it is possible to make a PLU number displayed that the description is not yet
programmed for.
Example: PLU 1 through PLU 100 are programmed already. To search a vacant PLU number:
1. Turn the key to the “PRG” (PROGRAM) position.
2. If a PRG Manager Password has been programmed, TYPE the (PASSWORD #) then PRESS the [CLERK]
key, or if you did not program a PRG Manager Password, go to Step 3.
3. ENTER (0), then PRESS [PLU]
4. “PLU 101” is displayed.
5. Continuously, PLU 101 can be programmed.
TO DELETE PLU DATA
“PRG” + (PLU #) + [PLU] + [PLU/DEPT ALT] + (0) + [DEPT] + [#/ST/NS]
1-1600
To delete the data of designated PLU number (in 1 – 1600) that has been programmed.
Example: PLU 50 is already programmed. To delete the data of it:
1. Turn the key to the “PRG” (PROGRAM) position.
2. If a PRG Manager Password has been programmed, TYPE the (PASSWORD #) then
PRESS the [CLERK] key, or if you did not program a PRG Manager Password, go to Step 3.
3. ENTER (50), then PRESS the [PLU] key and the [PLU/DEPT ALT] key in turn.
4. ENTER (0), then PRESS the [DEPT] key.
5. PRESS the [#/ST/NS] key to finalize.