Royal ALPHA9155SC - PC Interface and Software; Interface and Software Details

92
X/Z MANAGEMENT REPORTS (Continued)
TO TAKE AN INDIVIDUAL CLERK REPORT
"X or Z" + [PLU/DEPT ALT] + (Security #) + [CLERK]
4 digits (maximum)
1. Turn the key to the "X" or "Z" position as desired.
2. PRESS the [PLU/DEPT ALT] key.
3. ENTER (the Clerk Security Number), then PRESS the [CLERK] key.
TO TAKE A PLU REPORT
"X" or "Z" + [PLU/DEPT ALT] + [PLU]
1. Turn the key to the "X" or "Z" position as desired.
2. If a Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the [CLERK]
key,
or if you did NOT program a Manager Password, go to Step 3.
3. PRESS [PLU/DEPT ALT] , then PRESS the [PLU] key.
Important: A PLU Reading must be closed out in the "Z" position.
* X 1 *
INDIVIDUAL CLERK
CLERK02
NET TL 2N
8.10
TAX 2N
0.12
AMOUNT OF SALES
TOTAL TAX CHARGES
* X 1 *
PLU REPORT
1
PLU 0001 2Q
2.50
2
PLU 0002 1Q
2.00
3
PLU 0003 3Q
9.00
4
PLU 0004 1Q
4.00
QUANTITY OF PLU’s RUNG UP
TOTAL AMOUNT OF PLU’s RUNG UP
PLU NUMBER OR DESCRIPTION