85
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 35: VOIDING A PLU SALE WITH A COUPON DISCOUNT - (Assume PLU #1 is preset for the price of
$1.00 in Department 1 and deduct a 20¢ coupon. Void this entry):
1. ENTER (1), PRESS the [VOID] key, then PRESS -VOID-
the [PLU] key. PLU 0001 Ⅰ 1.00
2. ENTER (20), PRESS the [VOID] key, then PRESS -VOID-
the [-/CPN] key. COUPON N Ⅰ 0.20
3. PRESS the [AMOUNT TEND/TOTAL] key. ITEM CT -1
- or - TAX -0.04
1. PRESS the [VOID] key, ENTER (1), then PRESS
CASH -0.84
the [PLU] key.
2. PRESS the [VOID] key, ENTER (20), then PRESS
the [-/CPN] key.
3. PRESS the [AMOUNT TEND/TOTAL] key.
EXAMPLE 36: VOIDING A PLU SALE WITH A MINUS PERCENTAGE DISCOUNT - (Assume PLU #1 is preset
for the price of $1.00 in Department 1 and the [-%] key is pre-programmed for 10%. Ring up PLU
#1, deduct 10%, then void this entry):
1. ENTER (1), then PRESS the [PLU] key. -VOID-
2. PRESS the [-%] key. PLU 0001 Ⅰ 1.00
If the Minus Percentage Discount Rate is NOT 10 -%N -0.10
pre-programmed, type in the discount rate before ITEM CT -1
pressing the [-%] key. TAX -0.05
3. PRESS the [AMOUNT TEND/TOTAL] key.
CASH -0.95
4. PRESS [VOID], ENTER (1), then PRESS
the [PLU] key.
5. PRESS the [-%] key.
6. PRESS the [AMOUNT TEND/TOTAL] key.
EXAMPLE 37: VOIDING A PLU SALE WITH A PLUS PERCENTAGE RATE - (Assume PLU #1 is preset for the
price of $1.00 in Department 1 and the [+%] key is pre-programmed for 10%. Ring up PLU #1, add
10%, then void this entry):
1. ENTER (1), then PRESS the [PLU] key. -VOID-
2. PRESS the [+%] key. PLU 0001 Ⅰ 1.00
If the Plus Percentage Rate is NOT pre-programmed, 10 +%N -0.10
type in the discount rate before pressing the [+%] key. ITEM CT -1
3. PRESS the [AMOUNT TEND/TOTAL] key. TAX -0.06
4. PRESS [VOID], ENTER (1), then PRESS the [PLU] key.
CASH -1.16
5. PRESS the [+%] key.
6. PRESS the [AMOUNT TEND/TOTAL] key.
To Next Page
Loading...
