Royal ALPHA9155SC - Tax Rate Configuration; Program Third Tax Table Rate; VAT Tax Rate Programming

27
(Continued) TAX RATE
VAT TAX RATE (commonly used in Europe)
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS the
[CLERK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
PROGRAMMING THE VAT TAX RATE:
"PRG" + (TAX #) + [TAX 1] + (TAX RATE) + [TAX 2] + (TAX EXEMPT LIMIT AMOUNT) + [NON TAX]
1-4 0 - 99.9999% 6 digit #
TAX 1 = VAT 1 + (1)
TAX 2 = VAT 2 + (1)
TAX 3 = VAT 3 + (1)
TAX 4 = VAT 4 + (1)
Example: 10% Tax Programming.
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CLERK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (11), PRESS the [TAX 1] key, ENTER (100000), then PRESS the [TAX 2] key.
4. ENTER (TAX EXEMPT LIMIT AMOUNT), then PRESS the [NON TAX].
TO PROGRAM A SECOND VAT TAX RATE:
Example: 5%
1. Turn the key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, ENTER the (PASSWORD #), then PRESS the
[CLERK] key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. ENTER (21), PRESS the [TAX 1] key, ENTER (50000), then PRESS the [TAX 2] key.
4. ENTER (TAX EXEMPT LIMIT AMOUNT), then PRESS the [NON TAX].