73
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used.
EXAMPLE 7: NO-SALE FUNCTION - (Used primarily to open the drawer without ringing up a sale. For example,
to give change):
1. PRESS the [#/ST/NS] key. NOSALE 0#
Note: The number of times the No-Sale key is
will be monitored on the Management Reports.
EXAMPLE 8: REGISTERING A REFERENCE NUMBER - (Used to print a number, up to 8 digits, to identify an
invoice number, credit card number or any other number on receipts. Ring up the number 12345678
in a standard sale):
12345678#
1. ENTER (12345678), PRESS the [#/ST/NS] key. DEPT01 Ⅰ 1.00
2. ENTER (100), PRESS the [DEPARTMENT 1] key. ITEM CT 1
3. PRESS the [AMOUNT TEND/TOTAL] key. TAX 0.06
CASH 1.06
Note: The use of the reference number is not
in any activity counter or sales totals on the
Management Reports.
EXAMPLE 9: MULTIPLYING BY A FRACTION - (Multiply the quantity of 1.25, i.e., 1¼ yards of fabric at $1.00 in
Department 1):
1. ENTER (1.25), then PRESS the [QTY/TIME] key. 1.25Q @1.00
Note: When multiplying by a fraction it is DEPT01 Ⅰ 1.25
necessary to use the decimal point. ITEM CT 1.25
2. ENTER (100), then PRESS the [DEPARTMENT 1] key. TAX 0.07
3. PRESS the [AMOUNT TEND/TOTAL] key.
CASH 1.32
Note: The range of numbers from .01 to 9999.99 can
be used when ringing up the quantity of an item.
To Next Page
Loading...
