75
TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER
NOTE: Turn the key to the "REG" (REGISTER) position for registering sales transactions.
IMPORTANT: It is not necessary to press the Decimal Point when ringing up a price.
REMINDER: If Clerk Numbers are programmed, be sure to ENTER the (CLERK #), then PRESS the
[CLERK] key before ringing up a sale.
In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Department 2 is
programmed for no tax and Clerk #1 is used.
EXAMPLE 13: DEPARTMENT - (Assume the DEPT 99 is preset for the price of $1.00. Ring up the DEPT
# 99):
1. ENTER (99), then PRESS the [DEPT] key. DEPT99 1.00
2. PRESS the [AMOUNT TEND/TOTAL] key ITEM CT 1
CASH 1.00
.
EXAMPLE 14: EXEMPTING TAX ON AN ITEM - (Assume the Department 1 key is programmed as a taxable
department. Ring up a $1.00 item in Department 1 without charging tax):
1. PRESS the [NON TAX] key. DEPT01 1.00
2. ENTER (100), then PRESS the [DEPARTMENT 1] key. ITEM CT 1
3. PRESS the [AMOUNT TEND/TOTAL] key.
CASH 1.00
EXAMPLE 15: ADDING TAX TO A NON TAXABLE DEPARTMENT - (Assume the Department 2 key is
programmed for no tax and the Department 1 key is programmed with a 6% TAX 1 tax rate. Ring
up a $1.00 item in Department 2, charging the 6% tax rate):
1. PRESS the [TAX 1] key. DEPT02 Ⅰ 1.00
2. ENTER (100), then PRESS the [DEPARTMENT 2] key. ITEM CT 1
3. PRESS the [AMOUNT TEND/TOTAL] key. TAX 0.06
CASH 1.06
To Next Page
Loading...
