111
Appendix 2
CALCULATING STATE TAX TABLE CODES
STEP B: Enter the first amount (lower amount) of the last tax bracket of the "Irregular" breakpoint sequence.
Then press the (TAX2).
NOTE: Do not enter this amount by using the ( . ) Decimal Point key.
PROGRAM EXAMPLE:
TYPE PRESS
(243) (Tax 2)
STEP C: Enter the total of all the breakpoints of the "Regular" breakpoint sequence, then press the
(TAX 2) key.
PROGRAM EXAMPLE: Regular breakpoint sequence 29+28+29+29+28+29+28=200
TYPE PRESS
(200) (Tax 2)
STEP D: Enter the difference between the last tax amount applicable to the "Regular" breakpoint sequence and
the last tax amount applicable to the "Irregular" breakpoint sequence. Then press the
(TAX2) key.
PROGRAM EXAMPLE: 0.16 - 0.09 = 0.07
TYPE PRESS
(7) (Tax 2)
STEP E: Enter the individual breakpoints of the "Irregular" breakpoint sequence, then press the (SUBTOTAL
W/TAX) key. The (TAX2) key must be pressed after each breakpoint entry.
PROGRAM EXAMPLE: Irregular breakpoint sequence: 15,23,25,25,25,30,36,34,30
TYPE PRESS
(15) (Tax 2)
(23) (Tax 2)
(25) (Tax 2)
(25) (Tax 2)
(25) (Tax 2)
(30) (Tax 2)
(36) (Tax 2)
(34) (Tax 2)
(30) (Tax 2)
STEP F: Enter the individual breakpoints of the "Regular" breakpoint sequence, then press the (SUBTOTAL
W/TAX) key. The (TAX2) key must be pressed after each breakpoint entry.
PROGRAM EXAMPLE: Regular breakpoint sequence: 29,28,29,29,28,29,28
TYPE PRESS
(29) (Tax 2)
(28) (Tax 2)
(29) (Tax 2)
(29) (Tax 2)
(28) (Tax 2)
(29) (Tax 2)
(28) (Tax 2)
To Next Page
Loading...
