RDV6442G Control System manual V1.3
SHENZHEN RUIDA TECHNOLOGY
the to-and-fro cutting of array in sequence; one-way array means the cutting of array from one
direction to another. On selecting one-way array, the elements of each array are the same in
action mode and completely uniform in action fluency, which takes a little more time than
two-way array. Two-way array is the default option.
Back Position: The origin (the relative origin) and the machine
’
s absolute origin can be
selected. This parameter decides the parking position of laser head after each work.
Focus Setting: it means the distance from the focal point of laser head lens to Z-axle
origin. When there is no automatic focusing function, this parameter becomes invalid.
Backlash X: The X axes
’
backlash, accurate to 1um.
Backlash Y: The Y axes
’
backlash, accurate to 1um.
To Next Page
Loading...
