Ruida Technology RDV6442G - Briefing; Description of Controller Model; Comparison of Controller Performance

RDV6442G Control System manual V1.3
SHENZHEN RUIDA TECHNOLOGY
2
1.1 Briefing
RDC644XG system is a new generation system for control of laser engraving and cutting, which is
developed by RD Co., Ltd. In addition to high hardware stability, high voltage or static electricity rejection,
and friendly 3.5’’ TFT man-machine display. This system is provided with stronger software function
including perfect 4-axle motion control function, large-capacity file storage, two-channel adjustable digits
laser power control interface, USB driver of stronger compatibility, multi-channel general/special IO
control, and, this system can communicate with PC by USB2.0 or Ethernet, and the communication mode
is automatically checked by the system.
1.2 Description of Controller Model
1.3 Comparison of Controller Performance
RDLC420
RDC6332G
RDC6342G
RDC644XG
Power
Feature
One-way
5V, one-way
24V,
independent
Only one-way 24V
(compatible with
36V for power
supply, but not
recommended)
Only one-way 24V
(compatible with
36V for power
supply, but not
recommended)
Only one-way 24V
(compatible with 36V
for power supply, but
not recommended)
Laser Port
Feature
One-way
digit and
one-way
analog
Two-way digits and
two-way analog
port, settable
independently and
non-interacted
Two-way digits and
two-way analog
port, settable
independently and
non-interacted
Two-way digits port,
settable
independently and
non-interacted
USB
Copying
Common
Quick
Quick
Very Quick