24
• Follow the Block Diagram on the previous page.
• CHECK FOR LOOSE AND/OR BAD CONNECTIONS.
• Test the easiest components first, such as Power, Key Switch, DC-DC Converter, etc.
• Mower should be fully charged, if possible.
• BEFORE disassembly:
• Attempt to power on the mower.
• Click here if the mower won't turn on.
• Attempt to drive the mower.
• Click here if the mower won’t drive.
• Check if the USB Indicator and Headlights are functional.
• This tests the 80V-12V converter.
• Remove Control Panel cov e r.
• Test Key Switch.
• Check all other connections while panel is removed.
< Return to Table of Contents
Troubleshooting: Basics
Confidential and Proprietary - Property of Techtronic Power Equipment - DO NOT COPY or DISCLOSE
To Next Page
Loading...
