SAJ VM1000 - Page 111

VM1000 Series

‐110‐

Function
code
Description Set range Unit Default
Modifi
-cation
level
29: Power-on time reached(Err29)
30: Load loss(Err30)
31: PID feedback loss at running
time(Err31)
40: Time-out fault of rapid current
limit(Err40)
41: Reserved
E0.01
Running frequency
at the last fault
－ － － ●
E0.02
Current at the last
fault
－ － － ●
E0.03
DC bus voltage at
the last fault
－ － － ●
E0.04
Digital input status
at the last fault
－ － － ●
E0.05
Digital output
status at the last
fault
－ － － ●
E0.06
Drive Status at the
last fault
－ － － ●
E0.07
Timing result at the
last fault(from
power on)
－ － － ●
E0.08
Timing result at the
last fault(from
Starting)
－ － － ●
E0.09 Reserved － － － ●