VM1000 Series
‐109‐
Function
code
Description Set range Unit Default
Modifi
-cation
level
E0.00
Code of the last
fault
5: Overvoltage at
acceleration(Err05)
6: Overvoltage at
deceleration(Err06)
7: Overvoltage at constant
speed(Err07)
8: Buffer resistance
overload(Err08)
9: Undervoltage fault(Err09)
10: Ac drive overload(Err10)
11: Motor overload(Err11)
12: Phase loss at input(Err12)
13: Phase loss at output(Err13)
14: Module overheat(Err14)
15: External fault(Err15)
16: Abnormal
communication(Err16)
17: Contactor abnormal(Err17)
18: Current detection fault(Err18)
19: Motor tuning fault(Err19)
21: Abnormal para reading and
writing(Err21)
22: Drive hardware fault(Err22)
23: Motor short circuit to
ground(Err23)
24: Reserved(Err24)
25: Reserved(Err25)
26: Running time reached(Err26)
27: User-defined fault 1(Err27)
28: User-define fault 2(Err28)
－ － ●
To Next Page
Loading...
Need help?
General
