SAJ VM1000 - Page 56

VM1000 Series

‐55‐

（4）Steps of Panel Operation
Step Operation Panel display Indicator Note
Start Press “Run” Key
5- digit LED
display become
non-flicker from
flicker when
operating
RUN indicator become
lighter
Refer to 3.1
Viewing
running
status
Press “”key,
switch display
status in turn
there are four items
of default display：
running
frequency,setting
frequency,bus
voltage,output
current
Turn on the Hz,A,V
separately or turn them
on in group
Refer to 3.1
Stop
Press
“STOP/RESET”
5- digit LED display
b
ecome flicker from
non-flicker
RUN Light off Refer to 3.1
Table 4-3 Panel Operation Procedure











