SAJ VM1000 - Page 90

VM1000 Series

‐89‐

Function
code
Description Set range Unit Default
Modifi
-cation
level
Bit13: Length counting value
Bit14: Load speed display
Bit15: PID setting value
F7.04
Running status
LED display
selection 2
0000~FFFF
Bit0: PID feedback
Bit1: Current step of PLC
running
Bit2: Feedback speed, unit 0.1Hz
Bit3: Feedback speed
Bit4: Running time left
Bit5: AI1 voltage before
correction
Bit6: AI2 voltage before
correction
Bit7: Reserved
Bit8: Line speed
Bit9: Time since current power on
Bit10: Time of current running
Bit11: PULSE input frequency,
Unit 1Hz
Bit12: Setting of communication
Bit13: Reserved
Bit14: Master frequency reference
X display
Bit15: Auxiliary frequency
reference Y display
1111 0 ☆
F7.05
Stop status LED
display selection
0000~FFFF
Bit00: Target frequency(Hz)
Bit01: DC bus voltage(V)
Bit02: DI input status
Bit03: DO output status
Bit04: AI1 input value(V)
Bit05: AI2 input value(V)
Bit06: Reserved
Bit07: Counter value
Bit08: Length counting value
1111 33 ☆