Sakura Tissue-Tek TEC 6 - Page 51

2. Installation
51
End
Preparing Operating
0 AM 0 AM 0 AM
Start
time 1
Start
time 2
End
time 1
End
time 1
End
time 2
Example 2 [End time 1] is less than 4 hours earlier than [Start time 2]:
> Operation will end at [End time 1] or [End time 2], whichever is later.
Example 2-a In the case of the gure below, operation will end at [End time 2].
Paused
24 hours
End
Preparing Operating
0 AM 0 AM 0 AM
Start
time 1
Start
time 2
End
time 1
End
time 2
End
time 1
Example 2-b In the case of the gure below, operation will end at [End time 1].
Paused
24 hours
Auto Extension Operation in Auto Operation
Touching the “Extend” button during auto operation turns the extension mode
ON and the “Extend” button active.
Note that the operation mode differs depending when the button is touched.
• The “Extend” button is touched while the instrument is active (operating):
The end time of the day will be invalid and auto operation will be
performed until the end time of the next day.
OperatingPreparing
0 AM 0 AM 0 AM
Day 1 Day 2
Display of the
"Extend" button
Paused
Inactive Active Inactive
Instrument state
End
Start
time 1
End
time 1
Start
time 2
End
time 2
“Extend” button
↓
Invalid