Salus QUANTUM SQ610RF - OPERATING in OFFLINE MODE; Setpoint temperature change (manual mode)

53
8. OPERATING in OFFLINE MODE:
8.1 Setpoint temperature change (manual mode)
1
2
3
SQ610RF Quantum thermostat is in manual mode by default. To change setpoint temperature please look at the steps below.
Use or buttons to set
temperature.
Conrm by button. Thermostat will go back to the
main screen.
PLEASE NOTE: If you want to switch between schedule mode and manual mode you
have to press
button for 3 seconds on the main screen.
Active HEATING (or COOLING) is indicated by animating ame (heating) or snowake (cooling).