54
8.2 Schedule mode
To program schedule in oine mode please follow steps below:
There are 3 possible schedule variants. Use or buttons to select schedule variant and conrm by button:
Separate schedule for WORKING DAYS
and separate schedule for WEEKENDS.
One schedule for
WHOLE WEEK
Seven separate schedules for
SINGLE DAYS
1
2
3
Press button to enter the
main menu.
Enter into the schedule settings.
Thermostat will move to the next program
(next time period). If you made a mistake, you
can go back to the previous step using
button (changes will not be saved). Repeat
steps 4 and 5 for the next time periods in
the schedule. No time --:-- on the display
means given program is skipped. There are
6 programs/time perdiods in the schedule.
Hold
button for 3 seconds to save and exit
schedule editing.
After setting the schedule thermostat is working in schedule mode. You can see calendar icon on the display:
Schedule programming example for the WHOLE WEEK variant:
Use
or buttons to set
time. Conrm by button.
Use
or buttons to set
temperature setpoint.
Conrm by button.
4
5
6
7
To Next Page
Loading...
Need help?
General
