Salus QUANTUM SQ610RF - Reset user settings

60
8.6.7 Heat/cool selection
SQ610RF thermostat can work in heating or cooling mode. To set thermostat operating mode please follow steps below:
NOTE: Available only if thermostat is paired with Smart Plug SPE600 or Smart Relay SR600 in ONLINE MODE.
1
2
Select heat or cool mode by or
buttons. Conrm by button.
3
4
8.6.8 Reset user settings
1
2
3
4
5
To reset user settings to it’s default please follow steps below:
Go to the user settings.
Press
button to enter the
main menu.
Choose heat/cool option.
Go to the user settings.
Press
button to enter the
main menu.
Choose reset user settings.
Conrm reset by choosing YES.
User settings has been
successfully reseted.