55
3 sec.
3 sec.
8.4 Standby mode
STANDBY mode is a special setpoint temperature which can be activated/deactivated in any time. It can work like a frost protection or overheating
protection when needed. When standby mode is activated the clock continues running, as well as the temperature sampling. To enter STANDBY mode
hold the button for 3 seconds on your thermostat. You can always turn o STANDBY mode by holding the button for 3 seconds again.
3 sec.
1 2
3 sec.
3
8.5 Key lock function
To LOCK/UNLOCK SQ610RF Quantum thermostat keys in OFFLINE MODE you have to press and hold + buttons for 3 SECONDS. When
thermostat is locked you will see padlock icon on the display. When thermostat is unlocked padlock icon is not visible.
1
2
8.3 Temporary override mode
When thermostat is running schedule mode we can temporarily override it by setting new setpoint temperature.
Use or buttons to
change setpoint temperature.
Conrm by
button.
Calendar with hand icon means that
schedule has been overwritten until next
schedule program.
1
2
3
PLEASE NOTE: To cancel temporary override mode and go back to the schedule hold button for 3 seconds. The calendar
icon indicates that thermostat went back to schedule mode.
To Next Page
Loading...
Need help?
General
