Sam4s ER-5215M - Program 90 - Function Key HALO

122 • P-Mode Programming ER-5215M Electronic Cash Register v2.23
Program 90 - Function Key HALO
Use Program 90 to program a high amount lock out (HALO) for a function key. Only specific keys
require this program. For example, you can set a HALO for the CASH, CHECK or CHARGE keys.
Refer to the specific function key programming information in this chapter to determine when the
HALO option is available.
Note: An 8 digit HALO has a maximum entry of $500,000.00.
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0, press the SBTL key.
3. Enter a HALO of up to eight digits, (or "0" for no HALO). Press the function key on the
keyboard you wish to program.
4. To program additional function keys, repeat from step 2, or press the CASH key to
finalize the program.
Program 90 Instructions for %1-%5 Keys
Note: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage enter the
percentage in a five-digit format, without the decimal (XX.XXX). For example: for 10%, enter
10000; for 5.55%, enter 05550; for 99.999%, enter 99999.
0 SBTL 9
FUNCTION
KEY
Enter 1-8 digit
HALO
CASH
% CASH
Repeat for another
function ke
y
SBTL 0 9
Enter 5 digit rate or
amount (see note below)