Sam4s ER-5215M - Program 700 - Logo;Endorsement Message Programming

ER-5215M Electronic Cash Register v2.23 P-Mode Programming • 151
Program 700 - Logo/Endorsement Message Programming
Programming the Receipt/Check Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble message
of up to six lines can be printed at the bottom of each receipt, and an endorsement message of up to ten
lines can be printed when a check is endorsed on an optional slip printer. Each line can consist of up
to 32 characters.
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 0, press the SBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X Message Line X Message Line
1
1
st
line of Preamble
12
6
th
line of Postamble
2
2
nd
line of Preamble
13
1
st
line of Endorsement
3
3
rd
line of Preamble
14
2
nd
line of Endorsement
4
4
th
line of Preamble
15
3
rd
line of Endorsement
5
5
th
line of Preamble
16
4
th
line of Endorsement
6
6
th
line of Preamble
17
5
th
line of Endorsement
7
1
st
line of Postamble
18
6
th
line of Endorsement
8
2
nd
line of Postamble
19
7
th
line of Endorsement
9
3
rd
line of Postamble
20
8
th
line of Endorsement
10
4
th
line of Postamble
21
9
th
line of Endorsement
11
5
th
line of Postamble
22
10
th
line of Endorsement
4. Enter up to 32 three-character codes and press the SBTL key. (See “Descriptor Code
Chart” on page 104.)
5. Press the CASH key to finalize the program.
X
X/TIME X
CASH
7 0 0 SBTL
SBTL
Enter up to 32 three-
character codes